Introduction
HN-JCM brand membrane element produced by world advanced membrane technology and fully automatic production equipment. It can operation under the extra low pressure. Our membrane suitable for household water purifiers, hospitals, laboratory pure water, treatment municipal tap water, well water and other low salinity water sources.
The anti-fouling membrane element adopts a unique process, which changes the membrane surface and increases the hydrophilicity of the membrane surface. It has the characteristics of low pressure operation, high water production and good salt rejection performance, thereby reducing the pollution of pollutants and microorganisms on the membrane surface. The purpose of reducing the pollution of membrane elements and prolonging the service life is achieved.
Performance
TYPE |
4040-LP |
4040-ULP |
4040-XLP |
4040-SW |
4040-FR |
Rejection Rate |
99.5% |
99.2% |
98.5% |
99.7% |
99.5% |
Permeate Flow GPD(m³) |
2400(9.12) |
2400(9.12) |
2400(9.12) |
1200(4.5) |
2400(9.12) |
Test Pressure psi(Mpa) |
225(1.53) |
150(1.02) |
100(0.68) |
800(5.5) |
225(1.53) |
Max. Feedwater TDS/ppm |
5000 |
2000 |
1000 |
32000 |
2000 |
PH Rate Rang of Operation |
2-11 |
Max. Operation Temperature |
45ºC |
Recovery Rate of Single Membrane |
15% |
8% |
15% |
Note:1. The Max. continous operation temperature is 35ºC when PH rate over 10.
2.In certain conditions,if would cause membrane breakage if the free chlorine or the other oxidant in feedwater.The production quality guarantee range is notincluded membrane breakage by oxiadation.
Membrane Dimentions
Model No. |
A(Inch) |
B(Inch) |
C(Inch) |
D(Inch) |
E(Inch) |
4040-LP |
1016 |
99 |
19 |
29 |
958 |
4040-ULP |
4040-XLP |
4040-FR |
4040-SW |
ABOUT US
HYNAMO, Established since 2005.
Hangzhou Haina Environmental Protection Technology Co., Ltd.
We specialize in the development and manufacture of Reverse Osmosis Products.
We are composed of a team with rich experience engnieers and professional R & D personnel.
We insist on learning the most cutting-edge technology and provide high-quality products to customers.
RO membranes, in general, remove 90% or more of the contaminants present in the water, including TDS. When the TDS levels of your water source changes, it will affect the quality of the purified water output from your reverse osmosis system.
Even though in most circumstances the majority of the dissolved solids in water is salt, the S in TDS stands for solids, and not just salt. A reverse osmosis system uses a semi-permeable membrane to reject dissolved solids and other impurities from water.
There are several possible causes of a high TDS reading from water that's been purified by reverse osmosis: The quality of the water source has changed. The post-filter is adding minerals to the purified water. The rejected water is being re-used (applies to countertop RO systems). The reverse osmosis membrane needs to be replaced.
Our Exhibitions
Certifications
FAQ:
Q: How to buy your products?
A: we need some essential information, Required Filtered water quality, designed technological process, site engineering conditions (contact us for details),then we will design the uitable solutions for you and prepare to give you best price.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.