Nanofiltration Extremely Low-Pressure Household Water Purifier High Anti-Pollution Filter NF-2012-75g Membrane

• Customization: Available
• Type: NF
• Test Solution Concentration: 500ppm
• Model NO.: NF-2012-75
• Testing Pressure: 70psi
• Gallons Per Day: 75
• Desalination Rejection Rate: 90%
• Sample: Yes
• HS Code: 8421991000
• Production Capacity: 300000/Month
• Package Size: 32.00cm * 32.00cm * 34.00cm
• Package Gross Weight: 6.000kg

Product Description

HYNAMO DOMESTIC RO MEMBRANE:
 

This standard specifies product specifications for reverse osmosis membrane elements for household and similar purposes
(hereinafter referred to as reverse osmosis elements),as water purifiers, hospitals, laboratory pure water, treatment municipal tap water, well water and other low salinity water sources.

Product Specification

Model		NF-2012-75
Performance	Stable Desalination Rate%	60-90
	Average permeate Flow GPD	75
Test Conditions	Test Pressure	70psi
	Test Temperature	25±1ºC
	Test Solution(NaCl)	500±100ppm
	Test solution pH	7.0-7.5
	Single Membrane Element Recovery Rate	50±5%

Permeate Flow and Desalination Rate are based on test conditions: 2000ppm NaCl test solution, 25 ± 1 ºC, 50% recovery rate and the above-mentioned rated test pressure.

Dimensions
Model	Size(mm)
	A	B	C	D	E	F
NF-2012-75	298±0.5	22±1	17±0.5	45.5±1	22±1	20±3

Operating limit

Membrane element type	Polyamide composite membrane
Maximum operating temperature	113 ° F (45 ° C)
Working pressure	150psi (10bar)
Maximum feed water flow	2.0gpm (7.6lpm)
Continuous operation pH range a	2-11
Short-term cleaning pH range (30min)	1-13
Maximum water supply SDI	SDI 5
Tolerance of free chlorine	< 0.1ppm

a When the pH is above 10, the maximum temperature for continuous operation is 35 ºC;
b Under certain conditions, the influent containing free chlorine and other oxidants can cause severe membrane damage, which is not covered by the product warranty due to oxidative damage.
Product Specification

Model		GK-1812-75
Performance	Stable Desalination Rate%	95
	Average permeate Flow GPD	75
Test Conditions	Test Pressure	0.6Mpa
	Test Temperature	25±1ºC
	Test Solution(NaCl)	2000ppm
	Test solution pH	6.5-7.5
	Single Membrane Element Recovery Rate	30±5%

Permeate Flow and Desalination Rate are based on test conditions: 500ppm NaCl test solution, 25 ± 1 ºC, 50% recovery rate and the above-mentioned rated test pressure.

 

model	Stable rejection rate(%)	average permeate flowGPD(m3/d)	test condition
			operation pressure psi(Mpa)	test liquid NaCl(ppm)	recovery rate (%)
1812-BW50	97	50(0.19)	60(0.41)	250	15
1812-BW75	97	75(0.28)	60(0.41)	250	15
1812-BW100	97	100(0.38)	60(0.41)	250	15
2012-150	95	150(0.57)	70(0.5)	500	15
2012-200	95	200(0.76)	70(0.5)	500	15
2812-300	97	300(1.14)	70(0.5)	500	15
2812-400	95	400(1.52)	70(0.5)	500	15
3013-400	95	400(1.52)	70(0.5)	500	15
3013-600	95	600(2.28)	70(0.5)	500	15
3013-800	95	800(3.04)	100(0.68)	500	15
4040-XLP	98.5	2400(9.12)	100(0.68)	500	15
4040-ULP	99.2	2400(9.12)	150(1.02)	1500	15
4040-LP	99.5	2400(9.12)	225(1.53)	2000	15
8040-XLP	98.5	10500(39.9)	100(0.68)	500	15
8040-ULP	99.2	10500(39.9)	150(1.02)	1500	15
8040-LP	99.5	10500(39.9)	225(1.53)	2000	15